Pleated phenolic impregnated cellulose cartridges for industrial applications

• High flow rate, high dirt holding capacity and low pressure drop create optimal system operation
• Cellulose media supported by polypropylene components
• Three removal ratings
• Pleated configuration
• Compatible with a wide range of industrial fluids

.

Specifications:

MATERIALS OF CONSTRUCTION:
Filter Media: Cellulose/Microfiberglass
Support Materials: Polypropylene
Netting: Clear Polypropylene
Center Core: Polypropylene or Polyester (Optional)
End Caps: Plastisol (Self-gasketing PVC)

NOMINAL MICRON RATINGS:
2.0, 10.0, 20.0

EFFECTIVE FILTRATION AREA:
12 square feet per layer per 10 inch length

DIMENSIONS:
4-1/2" OD x 1" ID
Nominal 10", 20" lengths

OPERATING CHARACTERISTICS:
Maximum Differential Pressure=60 psi at maximum recommended
temperature of 125°F. Change out recommended at 30 psid.